Centred-disc butterfly valves
Centred-disc butterfly valve, sealed by elastomer liner (EPDM XC or Nitrile K), with lever, manual gearbox, pneumatic or electric actuator; semi-lug body (T2), full-lug body (T4). Body types T2 and T4 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. Connections to EN.
Technical data
PN: 10/16
DN: 40 - 1000
T [°C]: ≥ -10 - ≤ +110
Description
Centred-disc butterfly valve, sealed by elastomer liner (EPDM XC or Nitrile K), with lever, manual gearbox, pneumatic or electric actuator; semi-lug body (T2), full-lug body (T4). Body types T2 and T4 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. Connections to EN.
Applications
Engineering contractors. General water circuits, fuel oil, oil. Shut-off and control duties in water management, water supply and water treatment, drainage and irrigation.
- Concentric design
- Shut-off and regulating device
- Splitted shaft
- Pivot fixed by screw allows disassembly (demountable version)
- Long neck of the body according to heating system requirements
- Orange epoxy painting RAL 2002 – minimal thickness of 80 μm
- Suitable for vacuum service of 0,2 bar abs (with bonded liner)
- Safe movement of disc ensured by squared stem/disc connection
- ATEX certificate (Group II, Category 1/2 GD TX)
- Approved for gas and drinking water applications by DVGW,certification
Nominal diameter:DN32-1600（1"¼-64"）
Nominal pressure: PN6-16,Class150
Disc material:Brass,Aluminium bronze,Stainless steel,Ductile iron,Hastelloy®,Titanium
Connection: Flange
Application media:Water, Chemicals, Oil, Gas, air
- ABO 900 butterfly valves have a groove and tongue design, with double sided profiles of the liner ensuring proper alignment of the sleeve in the outer body, and a forming lobe for securing liner stability.
- The valve design encompasses a three stage sealing system that yields perfect tightness.
- Thanks to its extended neck, the ABO 900 butterfly valve provides for full thermal isolation of the actuator from the media thermal impact. Further, upward movement of the stem is avoided by a security grub screw in the body neck (blow-out proof).
- Thanks to a 2-piece stem system, and a highly profiled disc, the ABO Series 900 achieve high Cv (Kv) values and lower pressure drops. This simple but important feature ensure that ABO Series 900 butterfly valves are much more environmentally friendly compared to regular types of butterfly valves, as they consume less energy while being operated in the system.
ABO 600 Solf seal butterfly valve
ABO 500 Chemical special butterfly valve
